>

Wifi

Understand in 4 steps

      

1. Wifipool concept

Odoo CMS - a big picture 

  Through the WIFIPOOL app, it is possible to see the various parameters such as temperature, pH, chlorine, the electricity consumption of a pump, etc. on the mobile phone. In addition, the app can take control of the pool. Depending on the conditions defined in the app, it will turn on or off pumps, heaters, water treatment devices, etc...

We have 2 types of equipment

Measurement

Contains pH, RX, temperature, level & flow detection
probes and boxes

Click the image for catalog 


Control and adjustment

Contains peristaltic pumps, frequency regulators, Wifi power plugs 
and 2- or 3-way flow valves

Click the image for catalog 

2. Measurement : explained


With the Measurement modules you can measure different values ​​of the swimming pool.


You can read these values ​​on your mobile phone and use them later to switch on or off certain devices such as a filter pump / frequency regulator, heat pump or a chlorine dosage.


There are several measurement modules:

pH module: pH, flow and level

Redox module: Redox (Chlorine), flow and level

TLF module: Temperature (x2), flow and level

Combined modules with pH, ​​RX, Temp, level, flow and conductivity

The power supply for a measurement module is an ordinary USB socket



 

                                                           

3. Control and adjustment : explained

Odoo - Sample 1 for three columns

Wifi plugs (sockets)


With WiFi sockets, you can switch most of your swimming pool devices on and off, regardless of brand.

You can use a  smart Wi-Fi socket  to turn on or off your filtration pump (with or without our Wifi frequency regulator), your heating, your salt electrolysis, etc.

Odoo - Sample 2 for three columns

Wifipool app automation

 
Via the automation module of the Wifipool app, you can control sockets and smart devices. For example :

- Start the circulation pump every day from 8:15 a.m. to 5:45 p.m. by reducing the power consumed with the frequency regulator .

- Start the peristaltic acid addition pump when the pH is above 7.6 AND when the circulatory pump is on.

- Circulate water to the solar heating  when roof temperature is higher than water temperature AND water temperature less than 32°C.

The possibilities are limitless.

Odoo - Sample 3 for three columns

Control & adjustment devices


The in-app automation software controls several adjustment devices, which you can purchase separately from our webshop.
 Recommendation   
To facilitate and speed up the installation of all required devices, we have 100% pre-assembled treatment devices for : 

4. Steering via the app 

                                    

 

   The app becomes the central point of your pool control. You can see on a graph how quickly the pool is heating by solar panels, how well the pH remains under control and receives alarm messages to  notify about a chlorine tank getting empty, ....


The app is free and available for Android and IOS









To facilitate the installation of Wifi water treatment equipment, we have 100% pre-assembled treatment devices for :

Purchase plug & play Wifi products

Manuals - Quick Start Guide - Demonstration Videos - Brochures - Spare Parts

We refer to our download section to gain more technical insights in our installation and maintenance requirements

Download section